M6 8-inch Maritieme Subwoofer voor Infinite-Baffle gebruik (200 W, 4 Ω) - Glanzend Witte Trim Ring, Glanzend Witte Sport Grille
Met de juiste systeemopstelling kan de toevoeging van een subwoofer je kleinere hoofdsprekers ontlasten van het reproduceren van lage frequenties. Dit zorgt ervoor dat je hele systeem luider kan spelen en op elk geluidsniveau helderder klinkt.
Deze M6 infinite-baffle subwoofers zijn speciaal ontworpen en gebouwd voor echt maritiem gebruik. Dankzij de lange uitslagcapaciteit en robuuste ophangingssystemen produceert deze woofer diepe, krachtige basrespons die je boot-audiosysteem compleet zal transformeren.
De M6-8IB is het best te gebruiken met versterkers van 50W tot 200W en is geoptimaliseerd voor gebruik met een groot luchtvolume achter de woofer (minimaal 42,5 liter). Als je liever een speciale behuizing gebruikt, raadpleeg dan een van de voorgestelde ontwerpen in de specificatiesectie voor optimale prestaties.
Net als alle JL Audio maritieme luidsprekers is deze subwoofer gebouwd om bestand te zijn tegen een zoutwateromgeving en biedt hij jarenlang luisterplezier.
De productie van alle M6-luidsprekers vindt plaats in de JL Audio-fabriek in Miramar, Florida, met gebruik van wereldwijde componenten en materialen.
Verkocht per stuk.
Algemene specificaties:
Continuous Power Handling (RMS) | 200 W |
Nominal Impedance (Znom) | 4 Ω |
Afmetingen:
Nominal Diameter | 8.0 in / 200 mm |
Overall Diameter (A) | 8.80 in / 224 mm |
Bolt Hole Circle Diameter (B) | 7.97 in / 202 mm |
Frontal Grilles Protrusion* (C) | 1.45 in / 37 mm |
Mounting Hole Diameter (D) | 7.375 in / 187 mm |
Mounting Depth (E) | 5.00 in / 127 mm |
Driver Displacement | 0.033 cu ft / 0.93 L |
Net Weight | 8.70 lb / 3.90 kg |
*Frontal grille protrusion measured from mounting surface |
Parameters:
Free Air Resonance (Fs) | 54.92 Hz |
Electrical “Q” (Qes) | 0.852 |
Mechanical “Q” (Qms) | 10.314 |
Total Speaker “Q” (Qts) | 0.787 |
Equivalent Compliance (Vas) | 0.54 cu ft / 15.29 L |
One-Way Linear Excursion (Xmax)* | 0.53 in / 14 mm |
Reference Efficiency (no) | 0.28% |
Efficiency (1 W / 1 m)** | 86.7 dB SPL |
Effective Piston Area (Sd) | 35.15 sq in / 0.0227 sq m |
DC Resistance (Re) | 2.993 Ω |
* Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied. ** Efficiency (1 W / 1 m) is not an accurate indicator of a subwoofer’s output capability and should not be used as a comparison to other subwoofers to determine which one is “louder”. |
Sealed enclosure specifications
Wall Thickness | 0.75 in / 19 mm |
Front Baffle Thickness | 0.75 in / 19 mm |
Volume (net int.) | 2.00 cu ft / 56.6 L |
External Width (W) | 16 in / 406 mm |
External Height (H) | 16 in / 406 mm |
External Depth (D) | 18.25 in / 464 mm |
F3 | 51.78 Hz |
Fc | 61.89 Hz |
Qtc | 0.8869 |
Enclosure Notes * The enclosure recommendations listed above are external dimensions which assume the use of 0.75 in (19 mm) thick material. If you are using 0.625 in (16 mm) thick material, subtract 0.25 in (6.5 mm) from each dimension. Do not use any material with a thickness of less than 0.625 in (16 mm) as this may compromise the rigidity of the enclosure. * All enclosure volumes listed above are net internal volumes! Driver displacement, port displacement and brace displacement must be added to obtain the final gross internal volume. All enclosure dimensions above have already taken this into account. * When using multiple subwoofers in a common enclosure you will need to recalculate the enclosure and port dimensions. For assistance please contact your authorized JL Audio dealer or JL Audio Technical Support. * We recommend the use of this speaker in a bi-amplified system using high-quality satellite speakers and a high-quality amplifier. We do not recommend the use of this subwoofer with a passive crossover (coil), as this type of device will adversely affect performance. * All specifications are subject to change without notice. Safety Notice Prolonged exposure to sound pressure levels in excess of 100dB can cause permanent hearing loss. This high-performance speaker can exceed this level. Please exercise restraint in its operation in order to preserve your ability to enjoy its fidelity. When installing a subwoofer in your vehicle, it is extremely important to secure the enclosure firmly. We recommend bolting the enclosure through the metal of the floorpan or the frame of the vehicle with large diameter washers for reinforcement. If an enclosure is not firmly attached, it can become a projectile in a collision. This is particularly important in a hatchback, station wagon, sports utility vehicle, or van. |
Ported enclosure specifications
Wall Thickness | 0.75 in / 19 mm |
Front Baffle Thickness | 0.75 in / 19 mm |
Volume (net int.) | 1.50 cu ft / 42.5 L |
External Width (W) | 16 in / 406 mm |
External Height (H) | 16 in / 406 mm |
External Depth (D) | 15.125 in / 384 mm |
Internal Port Diameter (ID) | 4 in / 102 mm |
Port Length (L) | 13.50 in / 343 mm |
Tuning Frequency (Fb) | 37 Hz |
F3 | 31.26 Hz |
Enclosure Notes * The enclosure recommendations listed above are external dimensions which assume the use of 0.75 in (19 mm) thick material. If you are using 0.625 in (16 mm) thick material, subtract 0.25 in (6.5 mm) from each dimension. Do not use any material with a thickness of less than 0.625 in (16 mm) as this may compromise the rigidity of the enclosure. * All enclosure volumes listed above are net internal volumes! Driver displacement, port displacement and brace displacement must be added to obtain the final gross internal volume. All enclosure dimensions above have already taken this into account. * When using multiple subwoofers in a common enclosure you will need to recalculate the enclosure and port dimensions. For assistance please contact your authorized JL Audio dealer or JL Audio Technical Support. * We recommend the use of this speaker in a bi-amplified system using high-quality satellite speakers and a high-quality amplifier. We do not recommend the use of this subwoofer with a passive crossover (coil), as this type of device will adversely affect performance. * All specifications are subject to change without notice. Safety Notice Prolonged exposure to sound pressure levels in excess of 100dB can cause permanent hearing loss. This high-performance speaker can exceed this level. Please exercise restraint in its operation in order to preserve your ability to enjoy its fidelity. When installing a subwoofer in your vehicle, it is extremely important to secure the enclosure firmly. We recommend bolting the enclosure through the metal of the floorpan or the frame of the vehicle with large diameter washers for reinforcement. If an enclosure is not firmly attached, it can become a projectile in a collision. This is particularly important in a hatchback, station wagon, sports utility vehicle, or van. |