M6 10-inch Marine Subwoofer voor Infinite-Baffle gebruik (250 W, 4 Ω) - Glanzend Witte Trim Ring, Glanzend Witte Sport Grille
Bij een goed opgezette audiosysteem ontlast de toevoeging van een subwoofer de kleinere hoofdsprekers van de lage frequenties, waardoor je gehele systeem harder en helderder kan klinken op alle volumeniveaus.
Deze M6 infinite-baffle subwoofers zijn speciaal ontworpen voor gebruik zonder een speciale behuizing, wat ideaal is voor maritieme toepassingen. De lange excursiecapaciteit en robuuste ophangingssystemen zorgen voor diepe, krachtige basprestaties die het audiosysteem van je boot compleet transformeren.
De M6-10IB werkt het beste met versterkers in het bereik van 75W tot 250W en is geoptimaliseerd om te functioneren met een groot luchtvolume achter de woofer (minimaal 56,6 liter). Mocht je een subwoofer nodig hebben voor een kleine, afgesloten behuizing, dan is de M6-10W de beste keuze.
Net als alle JL Audio maritieme luidsprekers is deze driver ontworpen om bestand te zijn tegen een zoutwateromgeving en biedt hij jarenlang luisterplezier.
De productie van alle M6-luidsprekers vindt plaats in de JL Audio-fabriek in Miramar, Florida, met gebruik van wereldwijde componenten en materialen.
Verkocht per stuk.
Algemene specificaties:
Continuous Power Handling (RMS) | 250 W |
Nominal Impedance (Znom) | 4 Ω |
Afmetingen:
Nominal Diameter | 10.0 in / 250 mm |
Overall Diameter (A) | 10.75 in / 273 mm |
Bolt Hole Circle Diameter (B) | 9.70 in / 247 mm |
Frontal Grilles Protrusion* (C) | 1.66 in / 42 mm |
Mounting Hole Diameter (D) | 8.875 in / 225 mm |
Mounting Depth (E) | 5.90 in / 150 mm |
Driver Displacement | 0.052 cu ft / 1.47 L |
Net Weight | 12.60 lb / 5.70 kg |
*Frontal grille protrusion measured from mounting surface |
Parameters:
Free Air Resonance (Fs) | 43.76 Hz |
Electrical “Q” (Qes) | 0.907 |
Mechanical “Q” (Qms) | 11.315 |
Total Speaker “Q” (Qts) | 0.84 |
Equivalent Compliance (Vas) | 0.54 cu ft / 15.29 L |
One-Way Linear Excursion (Xmax)* | 0.52 in / 13.2 mm |
Reference Efficiency (no) | 0.28% |
Efficiency (1 W / 1 m)** | 86.1 dB SPL |
Effective Piston Area (Sd) | 50.11 sq in / 0.0323 sq m |
DC Resistance (Re) | 4.543 Ω |
* Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied. ** Efficiency (1 W / 1 m) is not an accurate indicator of a subwoofer’s output capability and should not be used as a comparison to other subwoofers to determine which one is “louder”. |
Sealed enclosure specifications
Wall Thickness | 0.75 in / 19 mm |
Front Baffle Thickness | 0.75 in / 19 mm |
Volume (net int.) | 2.00 cu ft / 56.6 L |
External Width (W) | 17 in / 432 mm |
External Height (H) | 17 in / 432 mm |
External Depth (D) | 16.25 in / 413 mm |
F3 | 41.54 Hz |
Fc | 53.41 Hz |
Qtc | 1.0253 |
Enclosure Notes * The enclosure recommendations listed above are external dimensions which assume the use of 0.75 in (19 mm) thick material. If you are using 0.625 in (16 mm) thick material, subtract 0.25 in (6.5 mm) from each dimension. Do not use any material with a thickness of less than 0.625 in (16 mm) as this may compromise the rigidity of the enclosure. * All enclosure volumes listed above are net internal volumes! Driver displacement, port displacement and brace displacement must be added to obtain the final gross internal volume. All enclosure dimensions above have already taken this into account. * When using multiple subwoofers in a common enclosure you will need to recalculate the enclosure and port dimensions. For assistance please contact your authorized JL Audio dealer or JL Audio Technical Support. * We recommend the use of this speaker in a bi-amplified system using high-quality satellite speakers and a high-quality amplifier. We do not recommend the use of this subwoofer with a passive crossover (coil), as this type of device will adversely affect performance. * All specifications are subject to change without notice. Safety Notice Prolonged exposure to sound pressure levels in excess of 100dB can cause permanent hearing loss. This high-performance speaker can exceed this level. Please exercise restraint in its operation in order to preserve your ability to enjoy its fidelity. When installing a subwoofer in your vehicle, it is extremely important to secure the enclosure firmly. We recommend bolting the enclosure through the metal of the floorpan or the frame of the vehicle with large diameter washers for reinforcement. If an enclosure is not firmly attached, it can become a projectile in a collision. This is particularly important in a hatchback, station wagon, sports utility vehicle, or van. |
Ported enclosure specifications:
Wall Thickness | 0.75 in / 19 mm |
Front Baffle Thickness | 0.75 in / 19 mm |
Volume (net int.) | 2.50 cu ft / 70.8 L |
External Width (W) | 17 in / 432 mm |
External Height (H) | 17 in / 432 mm |
External Depth (D) | 20.50 in / 676 mm |
Internal Port Diameter (ID) | 4 in / 102 mm |
Port Length (L) | 13.50 in / 343 mm |
Tuning Frequency (Fb) | 30 Hz |
F3 | 25.09 Hz |
Enclosure Notes * The enclosure recommendations listed above are external dimensions which assume the use of 0.75 in (19 mm) thick material. If you are using 0.625 in (16 mm) thick material, subtract 0.25 in (6.5 mm) from each dimension. Do not use any material with a thickness of less than 0.625 in (16 mm) as this may compromise the rigidity of the enclosure. * All enclosure volumes listed above are net internal volumes! Driver displacement, port displacement and brace displacement must be added to obtain the final gross internal volume. All enclosure dimensions above have already taken this into account. * When using multiple subwoofers in a common enclosure you will need to recalculate the enclosure and port dimensions. For assistance please contact your authorized JL Audio dealer or JL Audio Technical Support. * We recommend the use of this speaker in a bi-amplified system using high-quality satellite speakers and a high-quality amplifier. We do not recommend the use of this subwoofer with a passive crossover (coil), as this type of device will adversely affect performance. * All specifications are subject to change without notice. Safety Notice Prolonged exposure to sound pressure levels in excess of 100dB can cause permanent hearing loss. This high-performance speaker can exceed this level. Please exercise restraint in its operation in order to preserve your ability to enjoy its fidelity. When installing a subwoofer in your vehicle, it is extremely important to secure the enclosure firmly. We recommend bolting the enclosure through the metal of the floorpan or the frame of the vehicle with large diameter washers for reinforcement. If an enclosure is not firmly attached, it can become a projectile in a collision. This is particularly important in a hatchback, station wagon, sports utility vehicle, or van. |